BMW 7 Series E65 / E66 / E67 / E68 3D-printable parts

Replacement beauty cap for M50, M52 and M54 engine-cover fasteners, physically shown on the engine. BMWFans identifies the exact component as cap 11121726089 and confirms E34, E36, E38, E39, E46, E53, E60/E61, E65/E66, E83, E85 and Z3 applications. Use engine-bay-rated material and keep it clear of hot or moving parts.

I used: fibre reinforced ABS 20 % infill 4 outer wall thickness 0,4mm nozzle no support but slower outerwall speed Might also work with generic ABS/ASA/PETG BMW catalog identifies screw plug 71111179444 from 1986-06 with broad BMW toolbox usage; the API fitments reproduce the creator-listed E38/E39/E60/E65/E66 families. Verify dimensions against the original part and confirm full operation before regular use.

Service wrench for the notched BMW fuel-tank screw cap used on E46, E60/E61, E63/E64, E65–E68, E83 and E53 vehicles. The creator tested the same interface on an R53 MINI and identified BMW screw cap 16116762417; BMW catalog cross-reference independently confirms that cap across the listed BMW chassis. The printed wrench is not the screw cap itself, so no OEM number is assigned. Use a stiff engineering polymer, hand tools only, and replace rather than reuse any visibly damaged print.

Replacement square cover plug for the screw near the door armrest on BMW E65/E66-family door trim. The creator shows both a loose printed/reference comparison and the installed cover in an E65 door, and describes the geometry as an exact OEM-cover copy. The photographed part is the dark-silver trim variant corresponding to BMW 51417025647; verify color, 24 mm square footprint, door position, production date and VIN before printing because black, flannel-grey, beige and other door-trim cap variants also exist. Use cabin-heat-resistant material and test the retaining legs gently before final installation.